What is the torque for oil drain plug?
What is the torque for oil drain plug?
20 to 25 foot-pounds is the Torque specification for oil drain plugs.
How much oil does a 330ci BMW take?
Capacity: With filter 6.9 quartsAfter refill check oil level.
Do you really need a torque wrench for oil change?
If you are new to changing your oil though, use a torque wrench and the proper factory torque specs. It’s easy to over-tighten a bolt and strip the threads if you don’t have practice. You might also need ramps or a floor jack, jack stands, and wheel chocks if you have to go under the vehicle.
How much oil does a BMW 330i take?
5.6 quarts
Viscosity
| Viscosity | All TEMPS….0W-20 |
|---|---|
| Capacity: | With filter 5.6 quarts. After refill check oil level. |
| Torque: |
What kind of oil does a BMW 330ci take?
Valvoline – European Vehicle SAE 5W-40 Full Synthetic Motor Oil, 5 Quart (Part No. 881166)
What oil does a e46 330Ci use?
BMW TwinPower Turbo 5W-30 Engine Oil – 1 Liter.
What oil does a BMW 330ci take?
What torque wrench do I need?
Most home mechanics will find that a torque wrench with a 1/2-inch drive and at least an 18-inch handle is the best choice for lug nuts, cylinder heads, suspension bushings, and other likely uses.
How often should you change your oil in BMW 330i?
An oil change is one of the most notable and vital services for your car. BMW recommends getting your 2020 BMW 330i oil & filter replenished each 10,000 miles. Synthetic oil customarily should be replenished each 7,500 – 10,000 miles.
How much oil does a 330Ci e46 take?
Regardless of the model, you have in the US the general rule of thumb is that the BMW E46 takes 6.9 Quarts of oil from dry….Model Years 2001-2006.
| Model (Engine Code) | Capacity |
|---|---|
| 330i, 330xi, 330Ci (M54B30) | 6.9 Quarts (6.5 Liters) |
How much oil does 2002 330Ci take?
Recommended oil for my 2002 330ci
| Product Name | Capacities | Product |
|---|---|---|
| SAE 5W-40 FS Synthetic European Motor Oil | With filter 6.9 quarts After refill check oil level. | EFMQT-EA Add To Cart Add To Cart |
| SAE 0W-40 FS Synthetic European Motor Oil | With filter 6.9 quarts After refill check oil level. | EFOQT-EA Add To Cart Add To Cart |
How much oil does e46 330Ci take?
What is the torque for the oil drain plug?
I read that the torque for the oil drain plug is 18.5 foot-pounds / 25 NM. I’m going to conclude that it’s better not to use the torque wrench and instead use a fine touch and go by feeling.
Where did the torque specs come from for BMW E46 3 series?
Our chart torque specs were compiled from BMW E46 3 Series (1999-2005) Service Manual by Bentley Publications. Need a new torque wrench? Fan clutch nut to coolant pump (left-hand threads; with BMW tool)
Should I use a torque wrench to tighten the drain plug?
Some people say “don’t use a torque wrench” other people say to use one. I guess the main thing to watch out for is that the washer on the drain plug will begin to compress when the bolt gets tightened and that you should stop at that point.
What is the correct torque for this spark plug?
The correct torque is 8 Nm, like it says on the plug. Ideally, the plug should also be replaced.