What is the bandwidth of DDR4 2133?

Published by Anaya Cole on

What is the bandwidth of DDR4 2133?

What are the data transfer rates for DDR, DDR2, DDR3 and DDR4?

RAM Type Speed Peak Transfer Rate*
DDR4 2133 17 GB/s
2400 19.2 GB/s
2666 21.3 GB/s
3200 25.6 GB/s

How do I calculate DDR bandwidth?

The theoretical maximum memory bandwidth for Intel Core X-Series Processors can be calculated by multiplying the memory frequency (one half since double data rate x 2), multiplied by the number of the bytes of width, and multiplied by the number of the channels supported for the processor.

Is 2400 or 2133 Ram better?

On the face of it the 2400 RAM is faster. However it depends on whether the Motherboard can accept it and run that speed. Also the 2133 memory may have faster timings that could put perform the outright faster chip. Think of an agile sports car versus a dragster .

What is DDR4 memory bandwidth?

While DDR4 DIMMs top out at 3.2 gigabits per second (Gbps) at a clock rate of 1.6 gigahertz (GHz), initial DDR5 will deliver a 50% bandwidth increase to 4.8 Gbps. DDR5 memory will ultimately scale to a data rate of 8.4 Gbps.

What is my memory bandwidth?

Memory bandwidth is the rate at which data can be read from or stored into a semiconductor memory by a processor. Memory bandwidth is usually expressed in units of bytes/second, though this can vary for systems with natural data sizes that are not a multiple of the commonly used 8-bit bytes.

What speed DDR4 RAM should I get?

Generally, we’d recommend you stick with two DDR4 modules for a dual-channel build, each with a minimum of 3,000MHz clock speed. That should ensure you’re getting the most out of the best CPUs for gaming (opens in new tab).

Is 2133 RAM speed good?

On Intel I’d suggest getting something in the DDR4-3000 range or so, 2133 is actually a pretty decent bottleneck on modern Intel CPU’s. The benefits of extra memory bandwidth are highly game dependent though. Some games will not be bottlenecked at all at 2133, other games get 20 extra frames if you use 3000.

Can 4gb 2400 MHz and 4gb 2133 MHz RAM be used together?

Yes, you can. When the BIOS detects that the RAM is too fast for the memory controller or faster than the rest of the system memory, the fastest RAM will be clocked down to the speed of the lowest RAM. In your case, the CPU doesn’t support more than 2133 MHz so the additional stick will also be run at that speed.

Can you put a 2400 MHz RAM in a 2133 MHz laptop?

What is the difference between DDR4-2400 and DDR4 2133?

As mentioned in the previous thread, the DDR4 standard is DDR4-2133 CL15 1.20V. This JEDEC standardization allows RAM to be compatible in more types of systems. In other words, DDR4-2400 RAM can work in most DDR4-2133 computers, but only at DDR4-2133.

What is the correct ddr4-2133 bandwidth for my Ram?

In CPUz, BIOS, and other utilities that display memory SPD information, you may notice that the modules are recognized as DDR4-2133 or the information states “Max Bandwidth DDR4-2133 (1066MHz)” This is correct, even if you purchased DDR4-2400, DDR4-3000, or DDR4-4000+

Should I buy DDR4-2400 or DDR4 2133 RAM?

Prices of DDR4-2400 are expected to come down so there is little reason to get DDR4-2133 RAM unless you can get it at a cost savings or if that is the maximum memory speed of your platform.

What is the Max Bandwidth of DDR4 memory?

For the Max Bandwidth all extended profiles including X.M.P. are ignored and the highest rated standard profile will be used instead. So as of today this defaults to DDR4-2133 / PC4-17000 / 1066MHz for almost any DDR4 memory.

Categories: Blog