What is a 2N2222 transistor used for?
What is a 2N2222 transistor used for?
The 2N2222 is a common NPN bipolar junction transistor (BJT) used for general purpose low-power amplifying or switching applications. It is designed for low to medium current, low power, medium voltage, and can operate at moderately high speeds.
What electronics use 2N2222 transistor?
2N2222 NPN transistor has been commonly used for switching and very high frequency(VHF) amplifier applications. It is made of silicon material and specially designed for low voltage, low to medium current, and low power amplifier applications.
What is the gain of a 2N2222?
2N2222A has a gain value of 110 to 800, this value determines the amplification capacity of the transistor. The maximum amount of current that could flow through the Collector pin is 800mA, hence we cannot connect loads that consume more than 800mA using this transistor.
How many watts can a 2N2222 handle?
It’s a current controlled transistor. It has a Collector current of 800 mA. Power Dissipation of 2N2222 is 500mW. It can operate between -65 C to 200 C temperature.
How much voltage can a 2N2222A transistor handle?
The transistor 2N2222 or 2N2222A are NPN types and has the following electrical parameters: The device’s maximum voltage tolerance (breakdown voltage) across its collector and base is 60 volts for 2N2222 and 75 volts for 2N2222A, with the emitters kept open.
Is PN2222 same as 2N2222?
PN2222 and 2N2222 are both NPN bipolar junction transistors, and they are interchangeable under most circumstances.
Can I use 2N2222 instead of BC547?
2N2222 is the most common and excellent substitute for BC547. The only minor changes are in the input and output capacitance, which are slightly higher in case of 2N2222 and will only affect circuits during high frequency operation and not otherwise.
How can a PNP transistor be used as a switch?
For a PNP transistor, the Emitter potential must be positive with respect to the Base. Then the transistor operates as a “single-pole single-throw” (SPST) solid state switch. With a zero signal applied to the Base of the transistor it turns “OFF” acting like an open switch and zero collector current flows.
Which is the fastest switching device?
MOSFET
Amongst BJT, MOSFET, JEFT and Triode, MOSFET is the fastest switching device because of its quickest response.
What is the fastest switching transistor?
Feng and Hafez developed a transistor less than half a millionth of a metre long, with a maximum operating speed of 604 GHz, meaning it can carry out 604 billion operations every second. “This establishes a new benchmark for transistor performance,” says Doug Barlage at North Carolina State University, US.
Can we use 2N2222 instead of BC547?
BC547 vs 2N2222 Interchangeability The 2N2222 has an emitter, base, and collector pinout, whereas the BC547 has a collector, base, and emitter pinout. The collector to base voltage at 2N2222 is 60 volts, whereas it is 50 volts at BC547, and the collector to emitter voltage is 30 volts at 2N2222 vs 45 volts at BC547.
Can a 2N2222 replace BC547?
The 2N2222 and BC547 transistors are general-purpose transistors that are commonly used in electrical circuits; the BC547 transistor is one of the best transistor counterparts which can interchange with 2N2222 transistor.
Which transistor is equivalent to BC547?
BC547 Transistor Equivalent BC547 transistor can be used as an alternative to many transistors: BC548, BC549, BC636, BC639, 2N2222 TO-92, 2N2222 TO-18, 2N2369, 2N3055 and 2N3904 all are BC547 transistor equivalent.
Can I use PNP instead of NPN?
Generally, the PNP transistor can replace NPN transistors in most electronic circuits, the only difference is the polarities of the voltages, and the directions of the current flow. PNP transistors can also be used as switching devices and an example of a PNP transistor switch is shown below.