What does Hcnetsdk error mean?
What does Hcnetsdk error mean?
dll[91] occurs on the iVMS-4200 software and it’s an indication that there’s not enough power juice for the camera or that the Auto-change stream type is enabled. The fastest solution to solve this issue is to use a better PoE switch and turn the auto-change stream type off.
How do I fix HIK-connect?
- Open the Main Menu by clicking the Cog icon and then browse to Network > TCP/IP.
- Set your Preferred DNS Server so that it is the same as your IPv4 Default Gateway and set your Alternate DNS Server to 8.8. 8.8 and press Apply.
- To check if this has worked browse to Network > Advanced > Platform Access.
What is error 260015 in HIK-connect?
Hikvision support team has declared that this error is linked to buggy firmware on the device that has been fixed since. You need to update the camera or the NVR to the latest firmware version. Contact Hikvison or your seller dealer and upgrade all your devices to the latest software release.
How do I change my HIK-connect region?
Selecting Country or Region
- Tap to run the client.
- Tap Select Country or Region to enter the Country/Region page.
- Select a country or region,
- Tap to confirm your selection.
How do I install Hcnetsdk?
Method 1: Download Hcnetsdk. dll and install it manually
- Copy the file to the program install directory after where it is missing the DLL file.
- Or move the DLL file to the directory of your System (C:\Windows\System32, and for a 64 bit in C:\Windows\SysWOW64\).
- Now you need to reboot the computer.
Why is HIK connect offline?
Make sure the device has been connected to the Internet and it can connect to the Hik-Connect Server. a) Go to device to see whether the IP parameters belong to LAN. The IP address, subnet mask and default gateway need to be set correctly. Path: Configuration-Network-Basic Settings-TCP/IP.
Why is my Hikvision not working?
If all Hikvision cameras have stop working, then it’s most likely to be either: Power issue: if all cameras are powered off the same power-supply, then it can be possible for all the cameras to go down at the same time as the power supply fails.
How do I get my Hik-Connect online?
Enabling Hik-Connect Service on Web
- Open the web browser on your PC.
- Input the device IP address and press the Enter key on your keyboard.
- Input the device user name and the device password to login.
- Tap Configuration – Network – Advanced Settings – Platform Access to enter the Platform Access page.
- Check Enable.
How do I find the IP address of my Hikvision DVR?
Go to Configuration > System > Camera Management > Click on the blue link next to the camera you wish to log into. There you have it – you’re now logged into the camera and ready to perform actions on the camera. Load up SADP – you should see all the IP addresses of the cams listed.
How do I connect to HIK WIFI?
Connecting to Network by Wi-Fi Configuration
- On the Results page, tap Connect to a Network.
- Select a device type.
- Tap Wireless Connection.
- Follow the instructions on the Initialize Device page and tap OK to enter the Wi-Fi Settings page.
- Generate the Wi-Fi QR code.
How do I get my HIK-connect online?
Why is my hikvision not working?
How do I unbind Hik-Connect?
1) Open Hik-Connect app, tap the ADD icon. 2) Add device by scanning device QR code which is on the label of the device or input device serial number manually. 3) The app would pop up the message and unbind button. Press the unbind button to continue.
What is Isapi hikvision?
ISAPI. (ISAPI) is a text protocol in RESTful style based on HTTP for communicating between security devices/servers (e.g., Cameras, DVR, NVR, etc.) and client software/system. RESTful style. • HTTP.
What is network SDK?
Network SDKs enable you to compile your application to get zero trust, software defined perimeter security and high performance from any Internet connection. The network SDKs are now available as beta.
How can I get Hikvision back online?
Go to windows start menu, input cmd and click Enter key. iii. Input command ping dev.hik-connect.com and click Enter. If there is response, it means the DNS server address is correct and the Hik-Connect Server IP address is returned to the device.
Do Hikvision cameras have a reset button?
The reset button on the Hikvision IP cameras is usually located close to the memory card slot. You can easily find it even without any indication since it’s a pushdown-type button (as shown in the picture).
Why Hik-Connect is offline?
What is SADP tool for Hikvision IP cameras?
SADP tool is a software that can be used to detect and modify the IP address of Hikvision IP cameras, DVRs, NVR, doorbells etc. This tool works for Hikvision branded devices and their OEM version (sold under third party brands or sometimes un-branded.
When SADP sends a request and no response after 10 seconds?
Explanation: When SADP sends a request and no response from the device after 10 seconds, it will give this error. In this situation we need to use Wireshark to capture the packets to analyze the response time from the device. Explanation: When the IP address of the PC is changed and SADP is not restarted, the error will occur.
When the IP address is changed and SADP is not restarted?
Explanation: When the IP address of the PC is changed and SADP is not restarted, the error will occur. Explanation: When the installation directory is the same as the installation package, ensure the software installation directory and installation package are not in the same directory.
What does error code 404 mean on RTSP?
Error code 404: Channel No. error or the device does not support the sub stream. It will be prompted when failed to get the sub stream or the sub stream does not exist. Error code 424: Failed to receive the data for RTSP SETUP.