Published by Anaya Cole on


Microchip Technology ATMEGA328P-PN | AVR Microcontroller with picPower Microcontrollers. ATMEGA328P 28-DIP RISC 8-bit AVR microcontroller operating at 20MHz with 32KB program space and 2KB RAM. The ATMEGA328P-PN is a popular microcontroller due to it being a major component in the Arduino board products.

Is ATmega328 a AVR microcontroller?

Microchip Technology ATmega328 8-bit AVR® Microcontrollers (MCUs) are high-performance RISC-based devices that combine 32KB ISP Flash memory with read-while-write capabilities, 1KB EEPROM, 2KB SRAM, 23 general-purpose I/O lines, 32 general-purpose working registers, serial programmable USART, and more.

What is the difference between ATmega328 and ATMEGA328P?

DIFFERENCE BETWEEN ATMEGA328/328P Atmega328P just consumes lower power than Atmega328. Look up the numbers in the datasheet. This means that the 328P is manufactured in a finer process than the 328. Ex: 328 could be a 90nm process and 328P could be a 60nm process.

What does P mean in ATMEGA328P?

Agree, P = “pico-power”. If the “P” is after the dash in the part number, it refers to the package, as in Mega328P-PU which is pico-power in a 28-pin DIP package.

What is ATmega328P AVR MC?

ATmega328P is a high performance yet low power consumption 8-bit AVR microcontroller that’s able to achieve the most single clock cycle execution of 131 powerful instructions thanks to its advanced RISC architecture. It can commonly be found as a processor in Arduino boards such as Arduino Fio and Arduino Uno.

Which controller used for AVR?

AVR micro-controller : It is based RISC Instruction set Architecture (ISA) and also called as Advanced Virtual RISC. AT90S8515 was the initial micro-controller belongs to AVR family. AVR micro-controller is most popular category of controller and it is cheap. It is used in many robotic applications.

What is difference between AVR and atmega?

Difference Between Arduino and ATmega2560 AVR It differs from the ATmega328 in that it is only available in a surface mount package, so can’t be inserted into and removed from a socket on the Arduino. It also has more memory, more pins and more built-in hardware peripherals than the ATmega328.

How much RAM does ATmega328P have?

32 KB

Parameter Value
Flash memory 32 KB
Package pin count 28 or 32

What is AVR microcontroller full form?

However, it is commonly accepted that AVR stands for Alf and Vegard’s RISC processor. Note that the use of “AVR” in this article generally refers to the 8-bit RISC line of Atmel AVR microcontrollers.

How powerful is ATmega328P?

What is ATmega328P? ATmega328P is a high performance yet low power consumption 8-bit AVR microcontroller that’s able to achieve the most single clock cycle execution of 131 powerful instructions thanks to its advanced RISC architecture.

What is ATmega328P used for?

Applications. ATmega328 is commonly used in many projects and autonomous systems where a simple, low-powered, low-cost micro-controller is needed. Perhaps the most common implementation of this chip is on the popular Arduino development platform, namely the Arduino Uno, Arduino Pro Mini and Arduino Nano models.

Why do we use AVR microcontroller?

It contain on chip central processing unit (CPU), Read only memory (ROM), Random access memory (RAM), input/output unit, interrupts controller etc. Therefore a microcontroller is used for high speed signal processing operation inside an embedded system.

What is AVR microcontroller used for?

AVR was one of the first microcontroller families to use on-chip flash memory for program storage, as opposed to one-time programmable ROM, EPROM, or EEPROM used by other microcontrollers at the time.

Is AVR better than Arduino?

Advantages of AVR over arduino: There is no bootloader hence more flash memory as compared to arduino. Execution is fast since bootloader slows the start up time of a microcontroller. Extra GPIO pins, pin number 9 and 10 can be used as gpio pins in avr (provided, we are using internal rc oscillator)

Is Arduino and ATMEGA same?

How do I use ATmega328P without Arduino?

If you don’t have arduino board, you can use other programmers like USBasp to program your Atmega328p . In this case, do not use the direct upload button instead use the upload using programmer options from file menu.

Is Arduino AVR or ARM?

Arduino uses AVR- or ARM-based microcontrollers, depending on board. PIC is the oldest of the lot. There’s no such thing as an “Arduino microcontroller”.

How do you burn ATmega328P?

Burning the Bootloader

  1. Upload the ArduinoISP sketch onto your Arduino board.
  2. Wire up the Arduino board and microcontroller as shown in the diagram to the right.
  3. Select “Arduino Duemilanove or Nano w/ ATmega328” from the Tools > Board menu.
  4. Select “Arduino as ISP” from Tools > Programmer.
  5. Run Tools > Burn Bootloader.

How much power does ATmega328P use?

The current consumption in a such mode is about 26uA at 5V and 21uA at 3.3V. The battery life can be expected around 3 years which is good enough for my project.

How does an AVR work?

Automatic voltage regulators (AVRs) work by stabilizing the output voltage of generators at variable loads, but can also divide the reactive load between generators that are running in parallel (voltage droop), and helps the generator respond to overloads.

Categories: Blog