How much does superplasticizer cost?

Published by Anaya Cole on

How much does superplasticizer cost?

concrete. Very low water to cement ratios can be obtained with as much as 25-30% total water reduction. Typical dosage rates approximately 40% less than of standard melamine and naphthalene based superplasticizers, while maintaining the same percent water reduction….OPTIMUM 380 Premium Superplasticizer.

Our Price: $54.00
Your Total: $54.00

Do superplasticizers increase strength?

Superplasticizers transform stiff, low-slump concrete into flowing, pourable, easily placed concrete. They can improve workability, speed finishing, increase strength, conserve cement and help reduce shrinkage and thermal cracking.

How much is superplasticizer per yard?

RECOMMENDED DOSAGE RATE One 1.75-pound (1.1-kilogram) bag of Supercizer 5 is recommended for each cubic yard (cubic meter) of concrete to increase the slump up to 6 inches (15 centimeters) or to achieve up to 25% water reduction. The slump gain will remain in effect for 30 to 45 minutes.

What is PCE based superplasticizer?

It is an advanced polycarboxylate polymer based superplasticizer which can be used in theproduction of high-performance concrete. Compared to traditional superplasticizers, It has more powerful dispersing effect and shows high water reduction and excellent fluidity retention performance without causing retardation.

What are the disadvantages of superplasticizers?

The main disadvantage of superplasticizer usage is loss of workability as a result of rapid slump loss and incompatibility of cement and superplasticizers. Superplasticizers are soluble macromolecules, which are hundreds of times larger than water molecule (Gani, 1997).

Should I add plasticiser to concrete?

You use plasticiser when you need to improve the workability of concrete. Concrete’s workability improves as you add increasing amounts of water. Increasing the amount of water in the mix beyond the optimum leads to weaker concrete.

What is the disadvantage of superplasticizer?

What happens when you add too much superplasticizer?

The results show that an excess dosage of superplasticizer helps to achieve increased workability, causes a decrease in abrasion resistance and has no decisive effect (good or bad) on the compressive, flexural and tensile splitting strengths of HVFA concrete mixes.

Does plasticizer weaken concrete?

Adding an excessive amount of plasticizer will result in excessive segregation of concrete and is not advisable. Depending on the particular chemical used, use of too much plasticizer may result in a retarding effect. Plasticizers are commonly manufactured from lignosulfonates, a by-product from the paper industry.

What is PCE admixture?

Product Description. PCE-10 is a new generation super- plasticizer based on polycarboxylate technology. This product is designed to provide medium to high water reduction, while providing excellent flow ability during placement, and excellent slump retention without affecting initial setting time.

What is PCE polymer?

High Resolution Image. Polycarboxylate superplasticizers (PCEs) are comb-shaped polymers with an anionic backbone and several nonionic pendant chains, which typically are comprised of polyethylene glycols.

Do superplasticizers need compaction?

Workability and compaction enhancement Superplasticisers are commonly used in dry-pressed concrete to improve the workability and to enhance the compaction of concrete for increasing density and to improve the surface finish of the concrete product.

Why superplasticizers are used in concrete?

Superplasticizers (SPs), also known as high range water reducers, are additives used in making high strength concrete. Plasticizers are chemical compounds that enable the production of concrete with approximately 15% less water content. Superplasticizers allow reduction in water content by 30% or more.

Why do builders put Fairy liquid in cement?

Washing-up liquid Washing up liquid is commonly used as a plasticiser in cement mortar. However, it is thought to affect the long-term structural integrity of the mortar as it can add too much air, thereby creating bubbles. The surfactants in washing up liquid may also produce foam if used in excess.

What happens if you use too much plasticiser?

It puts to much air into the mix which makes it go like fluff. Once it’s hard you end up with voids in the motar so it’s not as strong as it should be. With voids then frost can get into it and it will crumble. I always used this type where you have the small bit at the top to measure it out.

What is difference between plasticizer and superplasticizer?

Plasticizers are chemical compounds that enable the production of concrete with approximately 15% less water content. Superplasticizers allow reduction in water content by 30% or more. These additives are employed at the level of a few weight percent. Plasticizers and superplasticizers retard the curing of concrete.

What is the advantage of use of superplasticizers?

Superplasticizers Help Keep Concrete Strong Composed of more advanced, higher-value chemicals than standard and mid-range water reducers, superplasticizers decrease the water-cement ratio while providing such benefits as: increased density. improved bond strength. greater volume stability and reduced shrinkage cracking.

What is the difference between plasticisers and superplasticizers?

What is PCE material?

PCE is a polymer-based compound obtained from methoxy-polyethylene glycol copolymer.

Categories: Trending