How many RAM slots does the Dell PowerEdge R710 have?

Published by Anaya Cole on

How many RAM slots does the Dell PowerEdge R710 have?

eighteen memory slots
The Dell PowerEdge R710 was designed with eighteen memory slots. The PowerEdge R710 is compatible with 1GB, 2GB, 4GB, 8GB, 16GB and 32GB ECC Registered (RDIMMs) Memory Modules.

What is DIMM in Dell server?

Information on Memory (DIMM) The different type of supported memory varies from server to server. It is recommended to review the server’s Installation and Service Manual for additional information.

How do I change the fan speed on my Dell server?

The Fan Speed Setting menu is found in the iDrac menu. During BIOS boot, F2 -> IDRAC settings -> Thermal -> Fan Speed Offset. The Fan Speed setting menu allows the user to select Low Fan Speed Offset and High Fan Speed Offset.

How can I make my r710 quiet?

Below are some ways that I seriously considered in order to bring the noise levels down.

  1. Move the rack somewhere else.
  2. Replace the stock fans with quieter ones.
  3. Apply noise deadening material around the rack.
  4. Make the stock fans spin slower.
  5. Overview.
  6. iDRAC Considerations.
  7. Guest Virtual Machine Configuration.

How do I reduce fan noise on my server?

One solution is to confine the propagation of much of the fan noise to a duct, and then use active noise control (ANC) to reduce the strength of the fan noise leaving the duct [1].

What is DDR4 self healing on Dell PowerEdge?

There are two main memory-related “self-healing” BIOS enhancements that were implemented for PowerEdge Servers with DDR4 running BIOS version 2.1. x and later. These enhancements do change the recommended steps/actions to take if memory errors occur and are logged to the LifeCycle log.

How do I find my Dell RAM server details?

  1. Enter the Service Tag of your server.
  2. Access the menu Documents.
  3. Locate the Service Manual or Owners Manual click PDF or HTML.
  4. Search for the menu Installing and removing system components > “Memory” or “System Memory”
  5. You find detailed information about the memory configuration for your dell server.

What type of RAM does the R710 support?

The R710 supports Registered ECC DDR3 DIMMs (RDIMM) or Unbuffered ECC DDR3 DIMMs (UDIMM). The system contains 18 memory sockets split into two sets of nine sockets, one set for each processor. Each nine-socket set is organized into three channels of three memory sockets per channel. Key features of the R710 memory system include the following:

How many memory channels can I put in my Dell R710?

RE: Dell R710 – Memory Configuration You could populate all 3 if you like, but you would need a 16GB for all the white slots, and 4GB dimms in all the black slots, that would make the 3 channels match. Your excluded from that bank due to the limited number of 16GB dimms you have. You will need to start with placing the 16gb dimms in A1 and B1.

Where can I find the owner’s manual for the Dell PowerEdge R710?

Dell PowerEdge R710 Systems Hardware Owner’s Manual on RAID Configurations See Table 11 for information on factory RAID configurations. For information on additional configurations, visit Table 11. Factory RAID Configurations

What is the PowerEdge R710 planar chipset?

The PowerEdge R710 planar incorporates the Intel Xeon 5500 processor series chipset for I/O and processor interfacing. This chipset is designed to support the Intel Xeon 5500 and 5600 processor series family, QuickPath Interconnect, DDR3 memory technology, and PCI Express Generation 2.

Categories: Blog