How do you remove Brother tape?

Published by Anaya Cole on

How do you remove Brother tape?

FAQs & Troubleshooting

  1. Hold the tape in your left hand, with the printed surface facing up, and hold the pen in your right hand.
  2. Pass the tape halfway through the long narrow hole in the pen’s pocket clip.
  3. Turn the pen three-quarters of a turn towards you and pull the pen away from you.
  4. Peel off the label backing.

How do I adjust my Brother label maker?

FAQs & Troubleshooting

  1. Press the [Label] key ( / ).
  2. Press the [Cursor] key ( ) until [Label Length] is displayed.
  3. Press the [OK] key ( ).
  4. Press the [Cursor] key ( ) until your desired length is displayed. ( AUTO or 30 – 300 mm / 1.2″ – 12.0″)
  5. Press the [OK] key ( ) to apply the setting.

What are p touch labels?

P-touch TZe tapes are the only tapes available that have a unique lamination, which makes the labels heat, cold, water, chemical and fade resistant (perfect for use outdoors, cold environments and near food). The Brother labels are extremely durable, have a professional finish and will outlast other labels.

What kind of tape does Brother P Touch use?

Laminated tape
1. Brother Ptouch Tape Types: Laminated tape – TZe Series Tapes: Laminated tape sticks to virtually any surface and is durable enough to withstand scrapes and abrasions.

What tape does the Brother P Touch Cube use?

Brother P-touch TZe
About the Product Uses Brother P-touch TZe durable, laminated label tapes up to 12mm (~½”) wide, in a variety of colors and types.

How do you unjam a Brother label maker?

Carefully grasp the tape cassette and pull it out of the device. Use a pair of plastic tweezers to gently remove any pieces of labels or foreign objects that may have jammed inside the label maker. Be careful not to damage any of the label maker’s internal mechanism while removing the jammed label.

How do you use p-touch tape?

Check that the P-touch labeler is turned off. Open the cassette cover as shown by the arrow in the illustration while pressing the part marked ” <<“. Insert a tape cassette. If the ink ribbon is loose, use your finger to wind the toothed wheel in the direction of the arrow on the cassette.

Categories: Trending