How do you adjust the carburetor on a Yamaha G1?

Published by Anaya Cole on

How do you adjust the carburetor on a Yamaha G1?

Yamaha G1 Carburetor Adjustment

  1. Unscrew the air mixture screw.
  2. Turn the screw in until it comes to a slightly seated position.
  3. Turn the screw outwards by 1-1/2 turns.
  4. Push the throttle stop screw backward until the throttle shaft is closed completely.
  5. Turn the screw in by a 1/4 turn.

What engine is in a Yamaha G1?

2 cycle gas engine
The G1 is powered by a 2 cycle gas engine with an oil injection system. The G1 body composition & gas engine underwent several modifications over the 11 years of production. The engines and bodies stayed very similar throughout the G1 model design.

Why does my Yamaha golf cart backfire?

The golf cart backfires through the carburetor because of an open throttle plate. The accelerator cable at the scale is out of adjustment and, in turn, stops the vessel from closing when the microswitch makes contact with the ignition.

What causes golf cart hesitation?

In most cases, the hesitation problem occurs due to bad batteries. If you have bought new batteries for your EZGO RXV, make sure to fully charge them before the first use. Batteries should then be charged after every use. To keep the batteries in check, get a Digital MultiMeter to measure the individual voltage.

How do you adjust the governor on a Yamaha G2 golf cart?

Yamaha G2 Governor Adjustment

  1. Locate the lever present above the transaxle. This lever houses a 10mm nut.
  2. Tighten the nut or move it inwards as much as you want based on the desired speed using a 1/4″ drive ratchet with a 10mm deep socket.

How many horsepower is a Yamaha G1 golf cart?

Pick Your Engine It has electronic fuel injection with a maximum output of 8.5/11.4 horsepower and 25.5/2500 of torque.

How do I stop my Yamaha golf cart from backfiring?

One simple way to stop the golf cart from backfiring is to use good quality fuel. Once this is done, ensure that the throttle plate is closed by adjusting the accelerator cable at the plate.

Why does my golf cart backfire when I let off the gas?

In almost all cases, whether it is a 2 cycle or 4 cycle engine, golf cart backfiring is caused by the accelerator cable being out of adjustment at the throttle plate of the carburetor. This problem has a relatively simple cure.

Why does my golf cart jerk when I accelerate?

Why does my Club car golf cart jerk when accelerating? The main reason why a Club car golf cart jerks when you accelerate it is due to a misaligned Inductive Throttle Sensor or dirty clutch.

What’s the horsepower of a Yamaha golf cart?

11.4 horsepower
Our Yamaha-built engine brings you over 60 years of proven performance featuring a filterless oil system for ease of maintenance. At 357cc’s, producing 11.4 horsepower, it’s the most fuel efficient carbureted engine in the industry with all the great features built into the Drive2 line of cars.

How many cc is a Yamaha G1?

Yamaha Gas G1 – 215cc ENGINE REBUILT COMPLETE TESTED – OEM Golf Cart Part.

Categories: FAQ